News

Motor winding welding is the key production process of the motor production process, such as the winding of the line and the line of welding, the line and the welding of the lead wire, copper strip rotor guide and end ring welding, etc., all these links will be directly related to the motor's ope...

In order to implement the "National Standardization Development Outline" and the Xi'an City Outline Implementation Plan, to further explore how to use digital standardization to support enterprises to do a good job of regional standardization, the afternoon of December 30, 2024, Xi'an City, the e...

Coil is the key to the motor manufacturing, coil good or bad on the one hand lies in the quality of the wire, on the other hand also lies in the coil processing technology, mainly including winding, molding and insulation and other aspects. Due to the voltage capacity, voltage level and the use o...

At the beginning of the new year, the company held a symposium on the work of distributors in 2025.

Rotor dynamic balancing is the focus of the motor manufacturing process and key processes, for small specifications of low-speed motors, some motor manufacturers through the production process control, omitted the rotor balancing process, but for high speed, large specification products, dynamic ...

Relative to the wire-wound rotor motor, cast aluminum rotor motor safety performance is better, the theoretical electrical failure rate is half of the wire-wound rotor motor. However, some special conditions, specific purposes of the motor, for some manufacturing process defects are particularly ...

Motor and all other machinery and equipment, in the process of operation, there is energy, heat, wear and tear, vibration and other physical and chemical parameters of the transfer and change, these changes in information directly and indirectly reflect the operation of the motor, and vibration c...

Frequency conversion and variable speed control are two very different speed control methods for electric motor products. Variable polarity speed control can only realize multiple speed gears of the same motor, and the corresponding gears correspond to constant speed; while variable frequency spe...

Large-size motor bearings, most of the hot set process for assembly, that is, the bearings will be heated to use the principle of thermal expansion and contraction of metals to complete the assembly of the interference fit with the shaft, which can ensure that the fit surface is not damaged.